Spinning is an ancient textile art in whichplant, animal or synthetic fibers are twisted together to form yarn (or thread,rope, or cable). For thousands of years, fiber was spun by hand using simpletools, the spindle and distaff. Only in the High Middle Ages did the spinningwheel increase the output of individual spinners, and mass-production onlyarose in the 18th century with the beginnings of the Industrial Revolution.Hand-spinning remains a popular handicraft.


Characteristics of spun yarn vary based on thematerial used, fiber length and alignment, quantity of fiber used, and degreeof twist.


The origins of spinning fiber to make string oryarn are lost in time, but archaeological evidence in the form ofrepresentation of string skirts has been dated to the Upper Paleolithic era,some 20,000 years ago.[1] In the most primitive type of spinning, tufts ofanimal hair or plant fiber are rolled down the thigh with the hand, andadditional tufts are added as needed until the desired length of spun fiber wasachieved. Later, the fiber was fastened to a stone which was twirled rounduntil the yarn was sufficiently twisted, whereupon it was wound upon the stoneand the process repeated over and over.


The next method of twisting yarn was with thespindle, a straight stick eight to twelve inches long on which the thread waswound after twisting. At first it had a cleft or split in the top in which thethread was fixed; later a hook of bone was added to the upper end. The bunch ofwool or plant fibers is held in the left hand; with the right hand the fibersare drawn out several inches and the end fastened securely in the slit or hookon the top of the spindle. A whirling motion is given to the spindle on thethigh or any convenient part of the body; the spindle is then dropped, twistingthe yarn, which is wound on the upper part of the spindle. Another bunch offibers is drawn out, the spindle is given another twirl, the yarn is wound onthe spindle, and so on


The distaff was used for holding the bunch ofwool, flax, or other fibers. It was a short stick on one end of which wasloosely wound the raw material. The other end of the distaff was held in thehand, under the arm or thrust in the girdle of the spinner. When held thus, onehand was left free for drawing out the fibers


A spindle containing a quantity of yarn rotatesmore easily, steadily and continues longer than an empty one, hence the nextimprovement was the addition of a weight called a spindle whorl at the bottomof the spindle. These whorls are discs of wood, stone, clay, or metal with ahole in the center for the spindle, which keep the spindle steady and promoteits rotation. Spindle whorls appeared in the Neolithic era.


Modern powered spinning, originally done bywater or steam power but now done by electricity, is vastly faster thanhand-spinning.

 

The spinning jenny, a multi-spoolspinning wheel invented circa 1764 by James Hargreaves, dramatically reducedthe amount of work needed to produce yarn, with a single worker able to workeight or more spools at once. At roughly the same time, Richard Arkwright and ateam of craftsmen developed the spinning frame, which produced a strongerthread than the spinning jenny. Too large to be operated by hand, a spinningframe powered by a waterwheel became the water frame.


In 1779, Samuel Crompton combined elements ofthe spinning jenny and water frame to create the spinning mule. This produced astronger thread, and was suitable for mechanisation on a grand scale.


In the 20th century, new techniques includingOpen End spinning or rotor spinning were invented to produce yarns at rates inexcess of 40 meters per second.


Yarns can be made of two, three, four, or moreplies, or may be used as singles without plying. Two-ply yarn can also be pliedfrom both ends of one long strand of singles using Andean plying, in which thesingle is first wound around one hand in a specific manner that allowsunwinding both ends at once without tangling. Navajo plying is another methodof producing a three-ply yarn, in which one strand of singles is looped arounditself in a manner similar to crochet and the resulting three parallel strandstwisted together. This method is often used to keep colors together on singlesdyed in sequential colors. Cabled yarns are usually four-ply yarns made byplying two strands of two-ply yarn together in the direction opposite to theplying direction for the two-ply yarns.

 

To make various yarns, besides adding random elements, spinners can vary all the same things as in a machined yarn, i.e. the fiber, the preparation, the color, the spinning technique, the direction of the twist, etc. A common misconception is yarn spun from rolags may not be as strong, but the strength of a yarn is actually based on the length of hair fiber and the degree of twist. When working with shorter hairs, such as llama or angora rabbit, the spinner may choose to integrate longer fibers, such as mohair, to prevent yarn breakage. Yarns made of shorter fibers are thus also given more twist than yarns of longer fibers, and are generally spun with the short draw technique.


The fiber can be dyed at any time, but is often dyed before carding or after the yarn has been spun.


Wool may be spun before or after washing, although excessive amounts of lanolin may make spinning difficult, especially when using a drop-spindle. Careless washing may cause felting; when done prior to spinning this often leads to unusable wool fiber. In washing wool the key thing to avoid is too much agitation and fast temperature changes from hot to cold. Generally washing is done lock by lock in warm water with dish-soap.


A tightly spun wool yarn with no air in it is called worsted; it is handspun from a roving or combed top, and the fibers all lie in the same direction as the yarn. A woolen yarn, in contrast, is handspun from a rolag, where the fibers are not as strictly aligned to the yarn created. The woolen yarn thus captures much more air, and makes for a softer and generally bulkier yarn. There are two main techniques to create these different yarns; short draw creates worsted yarns, and long draw creates woolen yarns. Often a spinner will spin using a combination of both techniques, and thus make a semi-worsted yarn


Short draw spinning is used to create worsted yarns. It is spun from combed roving, sliver or wool top. The spinner keeps their hands very close to each other. The fibers are held, fanned out, in one hand, and the other hand pulls a small number from the mass. The twist is kept between the second hand and the wheel- there is never any twist between the two hands.


Long draw is spun from a carded rolag. The rolag is spun without much stretching of the fibers from the cylindrical configuration. This is done by allowing twist into a short section of the rolag, and then pulling back, without letting the rolag change position in your hands, until the yarn is the desired thickness. The twist will concentrate in the thinnest part of the roving, thus when the yarn is pulled, the thicker sections with less twist will tend to thin out. Once the yarn is the desired thickness, enough twist is added to make the yarn strong. Then the yarn is wound onto the bobbin, and the process starts again.

Handspinners are split, when spinning wool, as to whether it is better to spin it in the grease' (with lanolin still in) or after it has been washed. More traditional spinners are more willing to spin in the grease, as it is less work to wash the wool after it is in yarn form. Spinners who spin very fine yarn may also prefer to spin in the grease as it can allow them to spin finer yarns with more ease. Spinning in the grease covers the spinner's hands in lanolin, and thus softens the spinner's hands.


Spinning in the grease only works really well if the fleece is newly sheared. After several months the lanolin becomes sticky, which makes it harder to spin using the short draw technique, and nigh impossible to spin using the long draw technique. In general, spinners using the long draw technique do not spin in the grease.


Spinners who don't spin in the grease generally buy their fibers pre-washed and carded, in the form of tow or roving. This means less work for the spinner, as they do not have to wash the lanolin out. It also means that one can spin predyed fiber, or blends of fibers, which are very hard to create when the wool is still in the grease. As machine carders cannot card wool in the grease, pre-carded yarn generally isn't spun in the grease. Some spinners, however, use spray on lanolin-like products to get the same feel of spinning in the grease with this carded fibre


Source: www.articlesbase.com