Online Monitoring System Machine Supplier

Our company is established manufacturer and supplier of On-line Quality Monitoring System on Ring Spinning Frames.

Model: OptiSpin

Operation Principle:

The OptiSpin sensor is installed right below the pigtail

It consists of a photo receiver facing a light emitting diode

During each revolution, the yarn balloon interrupts the light beam twice

The time between two successive interruptions serves as the basis for the calculation of the balloon speed, while the amount of light obstructed during the interruption is used as a rough diameter measure

Functionalities:

Accurate real time spindle speed detection allowing identification of slipping spindles

Indication of twist level based on spindle speed and delivery speed

Immediate ends down detection, including detection of raffles

Classification of yarn breakages during up or down movement of the ring rail and exact location in the bobbin build-up

Continuous yarn diameter estimation allowing detection of additional sliver or wrapping on draft cylinders

Flagging of problem spindles with section lights and lamp tree

Link to speed inverter for optimum control of spinning speed based on breakage level, ring rail up-down movement and bobbin build-up

Interface to roving stop unit

User friendly interface for set-up and reporting

Monitoring: produced weight, efficie