Burn injuries are one of the major global health problems. As per a recent report of World Health Organization (WHO), every year 195,000 people from all over the world die because of fire alone. Additionally, most of the people who survive from burn injuries carry the stigma for lifetime disabilities and deformity. Over 95% of burn-related deaths have been accounted from low income countries as most of the high income countries have made major advances in fire prevention strategies and burn care. Southeast Asia is on the top for fire-related deaths and also for the burn mortality rate among women. A burn injury may damage some or all skin layers and is caused by a hot solid, a hot liquid (scalding), or a flame (Source: International Society for Burn Injuries (ISBI)). However, injuries related to electricity, radioactivity, ultraviolet radiation, chemicals, and respiratory damage due to smoking are also considered as burn injuries. There are various systems for classifying burn wounds such as:

By severity: As per this system, burn injuries can be major, moderate, or minor (American Burn Association) based on various factors like the patient's age, total body surface area (TBSA) burnt, and co-morbidities.

By surface area: The "Rules of Nines" is applied to determine the burnt area where the burnt body is divided into sections and each section is equal to 9 percent of TBSA.

By depth: Ambroise Pare, a French barber-surgeon devised this system of classification which is based on the depth of a burn injury. As per this system, burns can be divided into first, second, and third/fourth degrees.

Apart from breathing, pain, nutritional, and circulatory maintenance, it is extremely important to protect a burn wound from microbial infections because of low levels of cell-mediated immunity and skin injury. These infections are mostly caused by fungi and bacteria like methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa, which release various proteases, adhesion and colonization proteins that damage adherent tissues.

Besides cleaning the wound and applying various topical anti-microbial agents, wound dressings could be an effective solution in preventing microbial infections for burn care. The suitability of a burn wound dressing depends on a burn type. Conventional dressings are not efficient enough to induce haemostasis (mechanism to stop bleeding), adherence and in holding a moist environment around wound. Due to the advances in the field of nanotechnology, it is now possible to design nanofiber-based wound dressings (NFDs) where an electrospun-nanofibrous layer is applied to a basic support fabric material. NFDs have the following advantages:


1.      Haemostasis: Induce haemostasis due to their nanofibrous structure


2.      High filtration & liquid absorption efficiency: Absorb wound exudates efficiently


3.      Semi-permeability: Facilitate cell respiration due to their porosity


4.      Conformability: Facilitate 3-D dressing due to flexibility of ultra-fine nanofibers


5.      Functional ability: Accommodate antibiotics and analgesics through co-spinning


6.      Scar free: Do not leave scars because of their biodegradability.


Additionally, NFDs operate in moist environment, do not require frequent changing and thus reduce pain and scars which is extremely beneficial for burn victims. Nanofibers are prepared by a series of techniques; however, electrospinning is mostly used to synthesize polymeric nanofibers. Additionally, protein nanofibers (tropoelastin) have also been shown to have immense potential in making NFDs.


In 2010, the global advanced wound care market was around $6.2 billion and is estimated to grow up to 12% in the coming few years. As per worldwide statistics, for burn wound care, a startling amount of $5 billion is required annually. These statistics demonstrate a potential market for burn care products and need for cost-effective dermal rehabilitation to make it available to general public. As NFDs are more efficient and less traumatic, it is expected that they would capture a significant amount of advanced wound care market share in the future. Recent breakthroughs and R&D activities in the field of NFDs are:


Chitosan-coated poly (vinyl alcohol) nanofibers for wound dressings: Heat-treated PVA nanofibrous matrix coated with chitosan solution to construct a biomimetic NFD. The mechanical stability and histological studies showed that this dressing was a better accelerator for wound healing, less hydrophilic and more tensile.


Hyperbranched polyglycerol (HPGL) NFD as drug delivery vehicle: A nanofibrous dressing of HPGL having Calendula officinalis which is an anti-inflammatory and wound healing agent was prepared and studies showed that HPGL nanofibers could prove to have drug delivery properties when used as NFD for wound care.

 

SiO NFD with embedded silver nanoparticles as recoverable wound cover: Silver nanoparticles (Ag NPs) were embedded on SiO nanofibers and results showed that due to the conformability of SiO nanofibers, this dressing facilitated convenient patterning into a shape required for wound cover. Embedded Ag NPs showed a long-term antibacterial effect while inorganic part of this NFD could be recovered through calcinations without lose of any flexibility.


Degradability of collagen could be improved by combining it with zein: Addition of zein could improve the electrospinnability of collagen while various other mechanical and in vitro degradable properties of the dressing could be regulated by altering collagen/zein blending ratio.


Nano ZnO in combination with Sodium alginate/poly (vinyl alcohol) nanofibers to enhance anti-bacterial property: Presence of nano-ZnO could improve antibacterial properties of sodium alginate/ PYA nano-mats especially over Escherichia coli and Staphylococcus aureus; however, optimal concentration of ZnO is yet to be formulated for providing maximum antibacterial activity with least toxicity is yet to be identified.


Regulated release of dual drugs with composite nanofibers containing drug-loaded nanoparticles: By adjusting the preparation process of the electrospinning solution, programmable release of dual drugs could be achieved through NFDs. This technique might be an effective way for an early wound healing.


Challenges and Future Prospects


Although modern age NFDs are more effective than conventional dressings, they are very expensive. NFDs are extremely difficult to handle due to their delicacy and require some kind of tangible support; however, chemical properties of the support fabric make nanofiber coating heterogeneous. In addition, nanofibers often show poor adhesion to the base support. In a recent study, plasma-treated cotton gauzes were used as the support fabric after electrospinning chitosan nanofibers, where nanofibers showed better adhesion, a low rate of degradation and moisture vapour transport. Thus a special care has to be taken in choosing a suitable combination of nanofiber and support fabric for making NFDs; however, with the recent nanotechnological advancements, we can expect many more efficient NFD products in the future.




This article was originally published in the April, 2014 issue of the New Cloth Market.